Select Page

Linksys Smart Wifi Not Working

Troubleshoot Now

There is no specific reason why Linksys Smart Wifi Not Working. It may the problem from your Internet Service Provider, your negligence to update your firmware, non-supportive browser and finally your little mistakes to manage with your Linksys Setup. As a result, one has to face the issues.

Linksys Smart Wifi Not Working – Solution

First of all the internet connection may slow down due to your over usage of data, your data has expired or your internet services are getting trouble from your internet service provider. So, you need to discuss with your ISP as well as you should remove the temporary files from your device connected to your Router. The problem to access linksyssmartwifi com may be the issue of your internet which you can resolve using a Linksys Extender.

On talking about the browser, you should keep your device cleared with cache and cookie data which also creates problems. If the problem is still existing then you can use any other browser (Google Chrome, Internet Explorer, Mozilla, etc.), there is no compulsion to use a particular web browser, you can use any browser that is already installed in your gadget.

When it comes to Linksys Router Setup with your device, make sure to follow its every step carefully. For example, once the Linksys Router, Computer and Modem are connected, you need to wait until its blinking LED becomes stable. It may create issues. So you need to proceed patiently as described in the instruction booklet.

In case the wireless setup is not working you can prefer the wired or manual setup to access linksyssmartwifi.com
When you open your browser, you can access Linksys Router Login via IP address 192.168.1.1 or linksyssmartwifi com.

Following each step when you reach to Linksys Smart Wifi login you have to confirm the correct Linksys Password that you saved last, if it is not working well or showing retry, don’t click on the retry option it may suspend your account for the specific time period such as minimum two hours. Make sure to remember the password. If it is not correct then there is only one solution to resolve Linksys Smart Wifi Not Working. Give preference to reset your router to default factory setting.

• In order to reset default factory setting, long press the reset button located on the back side of your router.
• Go to restart your router within minimum 10 minutes and remember once you reset, all the previous settings will be removed.
• Now you have to remove the connection between all the devices and then reconnect the devices again to access Linksys Smart Wifi Router admin page.

When you have logged into your Linksys Router make sure to first of all update the firmware. The new version of latest firmware brings updated features as well as save your Linksys account from errors like Linksys Smart Wifi Not Working, Internet connection is down, the router is not set up, Router Not Found, Error 2118, etc

Linksys Smart WiFi Setup
Linksys Account Login

WPS Setup For Linksys Extender

 

You may install the extender by pressing the genuine WPS buttons on your router and extension. follow Linksys’ WPS configuration instructions. To configure your extender using the WPS technique, keep going through the steps.

  • First, switch on the Linksys range extender.
  • then look for the WPS button there.
  • Only the side panel of the Linksys extender contains that key.
  • Find the button, push it, and hold it for a brief period of time.
  • As a result, the LED light on the extension starts to flicker.
  • Next, use your router to complete the procedure.
  • A WPS button should be present.
  • Press the button hard to make sure the light comes on.
  • Keep an eye on how the extension’s and the router’s lights evolve over time.

Manual Setup For linksys Extender

 

In order to manually configure your extender, kindly follow these steps:

  • After your computer or other device in the room, place the range extender.
  • Next, use an Ethernet wire to link your extender to the computer.
  • The extender and system must then be linked to the opposite end of the line using the required Ethernet ports.
  • After turning on your device, the range extender needs to be linked to an electrical outlet.
  • After that, connect the same to the Linksys extender’s primary server.
  • Additionally, enter Extender.linksys.com into your computer’s search bar.
  • The next thing you’ll see in your display is a sign-in page.
  • Enter the login details as a result.
  • Then, on the Linksys Extender Setup, fill the relevant field with the SSID of your network.
  • The addon must therefore be manually disabled and given some downtime.
  • To complete the configuration, the extension must then be turned on..